An Effective Line of Defense against Viruses (Coronavirus), Bacteria & Microbes
Face masks are intended to be used by medical personnel, patients and general public for the protection against microorganisms, dust particles and fluids. Facemasks are definitely good choice to minimize the exposure to microorganisms and dust particles present in the environment; however, in certain conditions facemask may promote microbial buildup and thus spread infections. Specifically, in current pandemic face masks have become part of our daily life to keep ourselves protected from Coronavirus, however; choosing the right face mask is quite important.
Protector®
Antimicrobial Face Masks provide protection against Viruses, Bacteria, Microbes and Dust particles. Viruses, bacteria and microbes are killed upon coming in contact with the mask surface thus, providing maximum protection. Its Antiviral Efficacy has been tested by independent laboratory in accordance to ISO 18184:2019 and proved to 99.9% effective against Coronavirus. While tested Antimicrobial Efficacy of Protector® Face Masks is 99.99% in accordance to ISO 22196 and ASTM E 2180.
Protector®
offers Antimicrobial Face Masks in two variants Medical and Surgical. Both types are available in Ear-loop and Tie-on style. Available packaging sizes are:
-Protector®
Antimicrobial Medical Face masks: pack of 10 and box of 50 pcs
-Protector®
Antimicrobial Surgical Masks: box of 50 pcs
Protector®
Antimicrobial Medical and Surgical Face Masks have been extensively tested for ASTM F 2100 and EN 14683 and conform to the standards.
Protector®
Antimicrobial Medical Face Masks:
1- Viral Filtration Efficiency (VFE): Efficiency of the Protector®
Face Masks as a barrier to viral penetration is 99%.
2- Bacterial filtration Efficiency (BFE): The efficiency of Protector®
Face Masks in preventing the passage of bacteria present in form aerosol is 99%.
3- Sub-micron Particulate Filtration Efficiency (PFE): The efficiency of the Protector®
Face Masks in filtering particles smaller than one micron is 99%.
4- Differential Pressure: This refers to measured pressure drop across a face mask or Air permeability of the mask, Protector®
Face Masks comply to ASTM Level 3 and EN 14683 Type IIR for breathability <5 mmH2O/cm2 & Pa/cm2 <60 respectively.
Protector®
Antimicrobial Surgical Face Masks meet the highest conformance levels of Standards ASTM F 2100 and EN 14683 i.e., Level 3 and Type IIR respectively:
1- Viral Filtration Efficiency (VFE): Efficiency of the Protector®
Face Masks as a barrier to viral penetration is 99%.
2- Bacterial filtration Efficiency (BFE): The efficiency of Protector®
Face Masks in preventing the passage of bacteria present in form aerosol is 99%.
3- Sub-micron Particulate Filtration Efficiency (PFE): The efficiency of the Protector®
Face Masks in filtering particles smaller than one micron is 99%.
4- Differential Pressure: This refers to measured pressure drop across a face mask or Air permeability of the mask, Protector®
Face Masks comply to ASTM Level 3 and EN 14683 Type IIR for breathability <5 mmH2O/cm2 & Pa/cm2 <60 respectively.
5- Splash Resistance: Protector®
Face Masks tested at 120 mmHg and conform to ASTM Level 3 & EN 14683 Type IIR for its resistance to penetration of splashes of liquid.
6- Microbial Cleanliness: This refers to the total number of viable microorganisms on the face mask. Protector®
Face Masks comply (≤30) to EN 14683 Type IIR.